Alto

MASTER MM3

Gallery

Other models

MASTER MM3 VERSIONS

Click on the length of the hose to download the rainfall chart!

MODEL

110 TG

120 TG

125 TG

135 TG

140 TG

150 TG

160 TG

BASE

MM3

HOSE DIAMETER

110

120

125

135

140

150

160

HOSE LENGTH

650 - 700 - 750

570 - 600 - 630 - 650 - 680

550 - 600 - 650

500 - 530 - 560 - 600

450 - 480 - 500 - 540

400 - 430 - 480

400 - 440

SPECIFICS: Turbine driven, model 10/50 - 25/120. Model with hot galvanised ground support platform, giving 360° turntable rotation. Structure shot-blasted treated with 2 applications of powder coating epoxy anti-corrosive primer and a top coat of polyesthere paint with high shock resistence, high atmospheric resistance and long lasting.

STANDARD EQUIPMENT

Hydraulic kit for jack, turntable rotation lifting trolley and anchor stabilizer legs, driven by the tractor's hydraulic system.
4 meters rubber supply hose complete with couplers.
Three wheels standard trolley, fixed body with weights.
Standard sprinkler with nozzles.
2 wheels model 385.65.R22.5
Steel double supply pipe.
Pressure gauge in glycerine bath and gauge cock.
Electronic controller kit DOSIDIS+, with solar panel and battery.
Crank for winding in hose.
Operator's manual and spare parts list.

EXTRAS

STEEL DOUBLE SUPPLY PIPE. Eases the supply of water to the hose reel in all working positions.
DISCHARGE VALVE. Stops the motor pump by creating a sudden pressure loss.
SHUT-OFF VALVE. Stops irrigation by creating a rise in pressure.
SHUT-OFF VALVE WITH PROGRAMMABLE ELECTRIC MOTOR. 4 different shut down speeds to avoid any water hammer.
TURNTABLE ROTATION KIT used to turn the turntable easily to the required position.
PTO WIND-IN KIT used for winding-in hose with a tractor pto. Standard fitting on machines with turbine, optional extra machines with bellow driving system.
HYDRAULIC KIT allows to use the hydraulic system of the tractor to drive the standing foot, the stabilizing legs, the trolley lifting system and the drum rotation.
GALVANISING recommended for machines spreading slurry and dirty water.
ROAD OMOLOGATION with certificate of conformity.
ENGINE DRIVEN INDEPENDENT HYDRAULIC KIT. Allows the movements hydraulically by means of a small diesel or petrol engine.
ALTERNATOR for battery recharge with regulation circuit.
MANUAL HYDRAULIC KIT for lifting trolley and anchor stabilizing legs.
TROLLEY FOR OVER FOLIAGE IRRIGATION
TROLLEY FOR IRRIGATION UNDER FOLIAGE LEVEL
AUXILIARY GUN connected to the dosidis, allows accurate irrigation of the last twenty meters around the hose reel.
HYDRAULIC PUMP ON BOARD driven by PTO of the tractor allowing machine's movements.
AIR COMPRESSOR used for blowing air into the hose to empty the machine from water.
REMOTE CONTROL for hydraulic kit.
GSM MODULE DOSIDIS allows the check of the set parameters and modify them from remote via SMS text messaging